|
LEVITON Surge Protection Devices
|
|
 Surge Protective and Standard AC Power Modules for Structured Media™ Centers
|
AC Power Modules and J-Box Kits provide power to the distribution modules in the Series 140, 280 or 420 Structured
Media Center (Series 140 SMC accepts J-Box kits only). The AC Power Modules feature two 15A-125V duplex receptacles and the J-Box Kits feature one receptacle.
These devices are housed in a painted steel enclosure that drops into a knockout in the bottom of the
SMC to increase space available inside the enclosure. For flexibility, both models are available with
and without surge protection.
The Hospital grade surge-protected units provide multi-stage (L-N, L-G, N-G) protection and EMI/RFI filtering that meets UL 1449 standards.
View/download pdf datasheet.
|
|
|
|
Wired-in Surge Protection Modules
|
These modules are designed for use by equipment manufacturers who wish to incorporate integral transient voltage surge suppression with exceptional EMI filtering into their product. These
devices provide a clamping profile that fully tracks the AC sine wave, providing low clamping voltage levels. They are also suitable for providing surge protection to branch circuits.
View/download pdf datasheet.
|
|
|
|
Residential Multimedia Surge Protection Panel
|
The 51110-PTC Panel-Mount Surge Protector is designed for use on 120/240V, 50/60 Hz single-phase AC power lines. The unit also
provides 2-pair telephone/fax/modem protection using hardwired screw terminations. Protection for dual CATV/satellite feeds is provided using Type 'F' connectors.
The 51110-PTC is
designed for mounting at the service entrance in homes, apartments and condominiums to protect against transient surges
entering the home through the AC power lines,
telephone lines, and cable TV/satellite feeds. Surface mount front surface mounting brackets are included with unit
View/download pdf datasheet.
|
|
|
|
Industrial Grade Surge Protective Receptacles—Back & Side Wired
|
Catalog Numbers 5280 and 5380 Industrial Grade duplex receptacles provide hard-wired, point-of-use surge protection for electronic equipment used on 15 Amp and 20 Amp 125 Volt branch circuits. Both receptacles are available in conventional ground and Isolated Ground (-IG) versions. These duplex receptacles are designed for use where transient voltage surge suppressors are specified and hard-wired devices are preferred.
They come with matching-color wallplates and are suitable for a wide range of industrial, commercial and
residential applications.
MOV-based circuitry provides surge protection for normal and common modes (phase-neutral, phase-ground
and neutral-ground) and an LED indicator monitors surge suppression status.
View/download pdf datasheet.
|
|
|
|
Hospital Grade Surge Protective Receptacles—Back & Side Wired
|
Hospital Grade duplex and single receptacles provide hard-wired, point-of-use surge protection for medical and other electronic equipment used on 15 Amp and 20 Amp 125 Volt branch circuits. Hospital Grade testing ensures that these devices can withstand the most demanding application environments. Receptacles are available in conventional ground and Isolated Ground (-IG) versions
Catalog Numbers 8280, 8281, 8380 and 8381 receptacles are designed for use where transient voltage surge suppressors are specified and hard-wired devices are preferred. The Hospital Grade receptacles pass stringent UL 498HG testing and are suitable for high-abuse health care, industrial and commercial applications. Matching-color wallplates are included with each device.
MOV-based circuitry provides surge protection for normal and common modes (phase-neutral, phase-ground and neutral-ground) and both an LED indicator and an audible alarm monitor surge suppression status.
View/download pdf datasheet.
|
|
|
|
DIN-Rail Surge Protection Receptacle Module
|
The Cat. No. 3880-DIN Rail Mounted Surge Protection Receptacle Modules are designed to mount on DIN rails in equipment cabinets where convenient plug-in transient voltage surge suppression is desired for cord-connected test equipment and portable computers. Each module provides MOV-based Normal Mode and Common Mode L-N, L-G, N-G protection. The Cat. No. 3880-DIN employs Hospital Grade Receptacles to ensure the absolute best electrical connection of equipment.
The Cat. No. 3880-DIN equipment cabinet surge protection modules are designed for use on 120V single-phase AC power sources. The module comes with a green protection LED (LED goes Off when surge protection is lost) and audible alarm which has an integral disable (quiet) switch. Power continues to be provided to connected loads in the event of protection loss.
View/download pdf datasheet.
|
|
|
|
Electronic Surge Protector with Upgradeable Modular Design
|
For your customers who are tired of buying a new surge device for every new piece of home electronic equipment they purchase, the Leviton Electronic
Surge Protector offers them a new future-proofing alternative by letting them buy one device that can do the work of many.
The Cat. No. 3880-DIN equipment cabinet surge protection modules are designed for use on 120V single-phase AC power sources. The module comes with a green protection LED (LED goes Off when surge protection is lost) and audible alarm which has an integral disable (quiet) switch. Power continues to be provided to connected loads in the event of protection loss.
View/download pdf datasheet.
|
|
|
|
|
Computer Surge Protector with Upgradeable Modular Design
|
The Leviton Computer Surge Protector comes with 9 outlets that guard against AC powerline surges plus a phone/splitter
surge protector snap-in module that plugs into one of two interchangeable module slots to guard your customers' office equipment
against damaging surges entering through telephone lines. It incorporates a convenient one-in/two-out phone line splitter function, as well.
The interchangeable module slots can accommodate a selection of other snap-in communication surge protection modules.
This safeguards their investment while allowing them to tailor their Computer Surge Protector to meet their changing surge protection needs.
View/download pdf datasheet.
|
|
|
|
Home Theater Surge Protector with Upgradeable Modular Design
|
The Leviton Home Theater Surge Protector comes with 9 outlets that guard against AC powerline surges plus a
coax surge snap-in module that plugs into one of two interchangeable module slots to block surges from entering CATV or DSS coax lines.
The interchangeable module slots can accomodate a selection of snap-in communication surge protection modules.
This protects their investment while allowing them to tailor their Home Theater Surge Protector to meet their changing surge protection needs.
View/download pdf datasheet.
|
|
|
|
Satellite System Surge Protector with Upgradeable Modular Design
|
Specifically configured for DSS satellite systems, the Leviton Satellite System Surge Protector offers all the features required in one device to protect your DSS equipment.
It comes with 9 outlets that guard against AC powerline surges.
In addition, there's a phone/splitter surge protector snap-in module that incorporates a convenient one-in/ two-out phone line splitter function, as well.
There's also a surge protector snap-in module to safeguard your customers' Cable TV (CATV) and DSS satellite receiver connections from damaging electrical surges.
The interchangeable module slots accommodate a selection of other snap-in communication surge protection modules.
This safeguards their investment while allowing them to tailor their Satellite System Surge Protector to meet their changing surge protection needs.
View/download pdf datasheet.
|
|
|
|
Panel-Mounted 7-Mode Surge Protective Devices with Advanced Monitoring Capabilities
|
74000 & 75000 units with removable modules are designed for installation at the service entrance and at branch panels, or as dedicated TVSS for critical equipment.
These devices provide dedicated surge protection for each phase-to neutral, phase-to-ground and neutral-to-ground in three-phase WYE systems. The diagnostic features allow users to monitor surge events on the incoming AC power line, including the magnitude, date and time of the event.
Features include advanced diagnostic monitoring of protection status for each phase, a surge event counter that records amplitude, date and time of event, an audible alarm for protection status, and replaceable plug-in modules.
View/download pdf datasheet.
|
|
|
|
Panel Mounted Multi-Phase Surge Protective Device (SPD)
|
Cat. No. 32000 is designed for installation in industrial and commercial facilities at service entrance or branch panels. All models protect against high-energy, high-voltage transient surges and are compatible with power-line carrier, home automation systems such as Leviton's Decora Home Controls.
It incorporates indicator lights and an audible alarm for monitoring power and surge suppression status as well as a dry contact for remote monitoring.
Three-phase units are suitable for both WYE and DELTA alternating current systems. One unit, Cat. No. 32120-001 is a single-phase surge suppressor.
View/download pdf datasheet.
|
|
|
|
|
Panel Mounted Multi-Phase Surge Protective Device (SPD)
|
Cat. No. 42000 is designed for installation in industrial and commercial facilities at service entrance or branch panels. All models protect against high-energy, high-voltage transient surges.
It incorporates indicator lights and an audible alarm for monitoring power and surge suppression status as well as a dry contact for remote monitoring.
Three-phase units are suitable for both WYE and DELTA AC power systems. One unit, Cat. No. 42120-001 is a single-phase surge suppressor.
View/download pdf datasheet.
|
|
|
|
Distribution Panel Mount Surge Protective Device (SPD)
|
Cat. No. 57000 with removable modules is designed for installation at the service entrance and at branch panels, or as dedicated TVSS for critical equipment.
It features indicator lights, a status relay and an audible alarm for monitoring power and surge suppression, and replaceable modules that deliver redundant protection.
View/download pdf datasheet.
|
|
|
|
"Seven-Mode" Panel Mount Surge Protective Device (SPD)
|
Cat. Nos. 57120-M3S, 57277-M3S and 57347-M3S with removable modules are designed for installation at the service
entrance and at branch panels, or as dedicated TVSS for critical equipment.
These devices provide dedicated surge protection
for each phase to neutral, phase to ground, and neutral to ground in three-phase Wye AC systems.
View/download pdf datasheet.
|
|
|
|
Panel-Mounted 7-Mode Panel Mount Surge Protective Device (SPD)
|
Cat. Nos. 47120-007 and 47277-007
are designed for indoor installation at the
service entrance and branch panels for
protection against high-energy, high-voltage
transient surges.
Cat. Nos. 47120-4X7
and 47277-4X7 feature a NEMA Type 4X
enclosure for outdoor installation at the
service entrance, utility kWh meters, or
other outdoor equipment locations.
These devices provide dedicated surge
protection for each phase to neutral,
phase to ground, and neutral to ground in
three-phase AC applications through
parallel wiring that facilitates connection
to any service ampacity.
View/download pdf datasheet.
|
|
|
|
Panel Mount Surge Protective Device (SPD)
|
Cat. No. 52000 with removable modules is designed for installation
at the service entrance and at branch panels, or as dedicated
TVSS for critical equipment.
View/download pdf datasheet.
|
|
|
|
Low Exposure Secondary Surge Arrester
|
Leviton's Cat. No. 54175-SSA Secondary
Surge Arrester offers power users a way
to reliably and economically help protect against
the entry of lightning strikes into farming irrigation
systems and pumps used in oil/gas and petrochemical
applications.
It can also be used to protect against
the entry of external transient surges through a structure's
service entrance. The 54175-SSA offers a quick, cost-effective
solution to the problem of transient voltage surges causing
malfunctions in pumps and motor appliance systems.
View/download pdf datasheet.
|
|
|
|
Secondary Surge Arresters
|
Leviton's Secondary Surge Arrester offers
power users a way to reliably and economically
help protect against lighting strikes entering
into farming irrigation systems and pumps used
in oil/petrochemical applications.
It can also be
used to protect against external transient
surges entering through a home's service
entrance. It offers a quick, cost effective
turnkey solution to the problem of transient
voltage surges causing malfunctions in pumps
and motor appliance systems.
View/download pdf datasheet.
|
|
|
|
Meter Socket Surge Arrester Adapters
|
Leviton's Meter Socket Surge Arrester Adapter offers
residential power users a way to reliably and economically
protect their homes against external transient surges that
enter through the home's service entrance.
It offers a
quick, cost-effective turnkey solution to the problem of
transient voltage surges causing malfunctions in sensitive
electronics.
The device installs quickly and easily at the electrical
service entrance and provides protection of up to 70,000
peak Amps of surge current.
View/download pdf datasheet.
|
|
|
|
PTC Multimedia Surge Suppression Panel
|
The Cat. No. 51120-PTC Multimedia
Surge Protective Device (SPD) is
designed for use at residential/light
commercial service entrance locations.
The unit provides surge protection for
utility AC power lines, telephone and
cable/satellite TV systems.
View/download pdf datasheet.
|
|
|
|
Surge Protective Device (SPD) for DH-485 and Blue Hose Networks
|
The Cat. No. 3803-485 is designed to provide transient voltage surge suppression for programmable logic devices
and other computer-related data network products operating on Allen Bradley DH-485 data networks.
The Cat. No. 3803-DHP is designed to provide transient voltage surge suppression for programmable logic
devices and other computer-related data network products operating on "Blue Hose" networks.
View/download pdf datasheet.
|
|
|
|
Equipment Cabinet Surge Protective Devices
|
Cat. No. 3800 devices are designed for mounting in standard equipment cabinets where transient voltage
surge suppression is desired for the enclosed equipment.
The MOV-based circuit design of each
module provides Normal Mode and Common Mode protection for line to neutral, line to ground and neutral
to ground.
The 3800 modules feature compact "black box" styling. Three modules are available:
DIN-rail mounting, terminal block wiring or wire leads.
View/download pdf datasheet.
|
|
|
|
DIN-Rail Single-Receptacle Surge Protection Module
|
The Cat. No. 3801-DIN din-rail mounted Surge
Protection Module is designed to mount on DIN rails in
equipment cabinets where convenient plug-in transient
voltage surge suppression is desired for cord-connected
equipment.
Each module provides MOV-based Normal
Mode and Common Mode protection (L-N, L-G, & N-G).
View/download pdf datasheet.
|
|
|
|
19-Inch Rack-Mount Surge Protective Devices (SPD)
|
Cat. No. 5500 devices are designed for mounting on 19-inch racks where transient voltage surge suppression is desired for rack-mounted electronic equipment, with a total of 12 protected outlets, 10 in back and two in front, to provide for the easy, convenient plug-in of all mounted equipment. Its advanced circuit design offers extremely tight clamping levels and exceptional noise attenuation.
View/download pdf datasheet.
|
|
|
|
19-Inch Rack-Mount Surge Protective Devices (SPD)
|
Cat. No. 5505 devices are designed
for mounting on 19-inch racks where
transient voltage surge suppression is
desired for rack-mounted electronic
equipment, with a
total of 12 protected outlets, 10 in
back and 2 in front, to provide easy
plug-in convenience for all mounted
equipment. Its advanced circuit
design offers low clamping levels and
good noise attenuation.
View/download pdf datasheet.
|
|
|
|
NEMA 3R-Rated Outdoor Panel Mount Surge Protective Device (SPD)
|
The Cat. No. 51120-3R outdoor panel mount SPD is designed for use at the service entrance, utility kWh
meter or other outdoor equipment locations in homes, pumping stations, radio towers and small businesses
where protection from high-energy, high-voltage transients is desired.
The Cat. No. 51120-3R features a
NEMA 3R-rated steel enclosure for protection against falling rain, sleet and external ice formations.
View/download pdf datasheet.
|
|
|
|
Surge Protective Devices for 4-20ma Signal Loop Networks
|
Both Cat. Nos. 3420-009 and 3420-035 are UL 497B Listed and CE Marked products for data communication circuits. Designed to provide transient voltage surge suppression for 4-20ma process control loop systems, these SPD's provide low clamping voltages and the ability to withstand high transient current surges that may be encountered by process control equipment operating in harsh electromagnetic environments or geographic areas where there is exposure to the effects of lightning strikes.
View/download pdf datasheet.
|
|
|
|
Surge Protective Devices (SPD) for Ethernet Data Networks
|
The Cat. No. 3861-ETH is designed to
provide transient voltage surge suppression
for products operating on Ethernet
data networks.
The 3861-ETH comes with
both RJ-45 input and output connectors.
This unit provides low clamping voltages
and the ability to withstand high transient current surges that may be encountered on
Ethernet PLC ports operating in harsh electromagnetic environments or in geographic
areas where a high probability exists of encountering the damaging effects of lightning
induced transients.
View/download pdf datasheet.
|
|
|
|
|
